News

Cost Estimation of Die Casting Components

Abstract:
Die casting, one of the most advanced metal forming techniques, serves as an effective means to achieve minimal to no-chip generation. It enjoys extensive applications and rapid development. Currently, die casting alloys are no longer limited to non-ferrous metals such as zinc, aluminum, magnesium, and copper, but have gradually expanded to include iron and steel castings. The widespread application of die casting components is primarily attributed to minimal waste, high efficiency, limited machining allowance, excellent product consistency, and versatility. Consequently, calculating and evaluating the cost of die casting components has emerged as a crucial aspect of engineering and cost analysis.

Keywords:

Die casting, cost estimation, material cost, molding cost, melting cost, post-processing cost, packaging and transportation cost, mold amortization, tax, and profit.

 


 

Cost Estimation Methodology for Die Casting Components

The cost of die casting components primarily comprises the following components: material cost, molding cost, melting cost, post-processing cost, packaging and transportation cost, mold amortization, 7% tax, and 10% profit.

  1. Material Cost

Calculated by multiplying the product weight, including a 3-5% loss factor, by the material price. For instance, a rear left pedal bracket weighing 275g with minimal sprue material (estimated at 3% loss) and a material price of 17,500 yuan/ton, the material cost is: 275g * (1+0.03) * 1.75 cents/g = 500 cents = 5 yuan/piece. It is worth noting that aluminum alloy sprue material is recyclable, typically added back at a 95:5 ratio, meaning that only sediment loss and oxidation need to be considered for actual loss, which normally ranges between 1.05 and 2. Higher losses indicate potential issues with the ADC12 material or production management.

  1. Molding Cost

Comprises labor, utilities, and depreciation of the die casting equipment. Specific calculations require parameters such as the machine's price, lifespan, power, and daily output. For example, a 250t die casting machine costs approximately 250,000 yuan, with a 10-year lifespan (though they can typically last 15-20 years), a power rating of 22KW, and a production rate of one product per minute. Assuming an 8-hour shift with 500 products produced daily, the depreciation cost per piece is 0.13 yuan, utilities (electricity) cost 0.35 yuan/piece, and labor cost 0.2 yuan/piece, totaling 0.68 yuan/piece for molding.

  1. Melting Cost

Calculated by dividing the hourly depreciation cost (furnace price ÷ lifespan hours) by capacity and adding the average electricity cost (furnace power ÷ capacity).

  1. Post-Processing Cost

Involves surface treatments such as sprue removal, drilling, tapping, deburring, and tumbling, calculated based on the sum of labor costs for each process.

  1. Packaging and Transportation Cost

 Distributed evenly across packaged units, with transportation costs varying by distance.

  1. Mold Amortization

Assuming a mold cost of 35,000 yuan with a lifespan of 100,000 shots, the amortization cost per piece is 0.35 yuan.

  1. Tax and Profit

Adding a 7% tax and a 10% profit margin.
Combining all costs, the total cost per piece is approximately (5 + 0.68 + 0.5 + 0.2 + 0.1 + 0.35) * 1.07 * 1.1 = 8 yuan/piece.

  1. Die-casting Machine Costs and Wear Part Amortization Costs in Operation

Die casting machine costs vary by tonnage:

180T Die-casting Machine: ¥4.0 per shot

250T Die-casting Machine: ¥6.5 per shot

400T Die-casting Machine: ¥8.0 per shot

500T Die-casting Machine: ¥10.0 per shot

650T Die-casting Machine: ¥12.0 per shot

800T Die-casting Machine: ¥15.0 per shot

1000T Die-casting Machine: ¥22.0 per shot

1250T Die-casting Machine: ¥32.0 per shot

Consumables like sealing rings for punches, costing around 2000 yuan each and lasting approximately 30,000 shots, contribute an additional 0.15 yuan/shot.

  1. Die Casting Mold Costs:

Commonly use imported Japanese-grade materials like H13, SKD61, 8407 for cores and cavities, with 45# steel for mold bases.

This comprehensive methodology ensures accurate cost estimation for die casting components, facilitating effective engineering and financial decision-making.