News

Sheet Metal Bending Process Essentials

Abstract:

This paper delves into the essential aspects of sheet metal bending processes, emphasizing critical factors that influence the quality and performance of bent components. The focus is on the deduction of bending coefficients, the capabilities of bending machines, minimum bending sizes, achievable angle ranges, specific considerations for U-channel bending, edge hemming techniques, and distance requirements between base holes and bending lines. Additionally, challenges encountered during the bending process and the extensive application of sheet metal bending in various industries, particularly in the manufacturing of brackets and gearbox housings, are discussed. The aim is to provide a comprehensive understanding of the key elements in sheet metal bending for engineers and practitioners in the mechanical engineering field.

Keywords: Sheet Metal Bending, Bending Coefficient Deduction, Bending Machine Capabilities, Minimum Bending Size, Achievable Angle Range, U-Channel Bending, Edge Hemming, Application of Sheet Metal Bending

 


 

I. Deduction of Bending Coefficients

Sheet metal processing, also known as sheet metal fabrication, involves the shaping, cutting, and assembling of thin metal sheets into various components and products. These processes are crucial in industries such as automotive, aerospace, electronics, and construction, where precision and durability are paramount. This paper discusses the key components and processes encountered in sheet metal factories.The deduction of bending coefficients is an indispensable step in sheet metal processing. Factors such as material thickness, bending angle, and die used must be considered to deduct the appropriate bending coefficients, ensuring the precision and desired shape of stamped parts. In automotive stamping, this deduction is particularly crucial, requiring tailored bending parameters based on component location and function. Similarly, precise calculations and adjustments are necessary for printer and aluminum stamping processes to ensure quality and performance. Rational deduction of bending coefficients is thus a key factor in ensuring stamped part quality.

Several methods, including bending coefficients, deductions, and K-factors, can be employed to calculate the unfolded dimensions of parts. Currently, bending deductions are commonly preferred. The specific deduction values are listed below:

Bending Deduction Table

 

Thickness

Stainless Steel

AL

Q235

Angle

 

0.9

1.3

1.7

2.3

3.0

5.0

1.0

3.0

5.0

90

1.75

2.65

3.81

4.40

6.30

9.00

1.10

5.40

9.00

 

II. Bending Capabilities of Bending Machines

Mainstream bending machines feature a maximum bending length of 3100mm, a maximum bending width of 500mm (scribing required for widths exceeding 500mm), and a maximum bending thickness of 3mm. These machines are widely used in various stamping applications, including automotive, printer, and aluminum stamping, requiring precise adjustments based on material properties and process requirements. In aluminum stamping, the material's ductility and springback necessitate careful consideration of bending precision.

III. Minimum Bending Size

The minimum bending size in sheet metal processing depends on material thickness, elasticity, and plasticity. For automotive and printer stamping parts, the minimum bending size should be as small as possible within material limitations to enhance part precision and conserve material. For lightweight materials like aluminum, special physical properties must also be considered.

 

 

 

 

 

Minimum Bending Size Table

Material Thickness (mm)

Minimum Bending Size (mm)

0.9

5.67

1.3

8.50

1.7

11.32

2.3

11.32

3.0

17.69

IV. Achievable Angle Range

The achievable angle range in sheet metal processing encompasses straight, angled, and arcuate cuts, punches, and bends. Common bending machines can process angles from 30° to 180°. For sharp angles, the minimum bending size is 10mm with a maximum plate thickness of 1.7mm; dull angles follow the minimum bending size guidelines.

V. U-Channel Bending Dimensions

Illustrations depicting bendable sizes for U-channels with thicknesses up to 1.3mm and above 1.7mm are provided, along with a note on the maximum height limitations for a given width using a universal large bending tool.

 

                                                   

 


                Figure 1 T<=1.3                                                                           Figure 2 T>=1.7

 

VI. Edge Hemming

Maximum material thickness for edge hemming is 1.7mm, with specific minimum dimensions detailed in a table. When the dead edge length exceeds 1250mm, at least one process slit is required.

 

                                                                            

 

                                                   Hemming                                                                                                                                  External flanging

VII. Distance Requirements between Base Holes and Bending Lines

Holes located closer than the minimum bending size to the bending line may undergo severe deformation; hence, such configurations should be avoided or achieved through separate blanking and welding.

                                                                                                                           

 

 

VIII. Challenges in Bending Processes

Challenges include incomplete unfolding, material overlap after unfolding, and inability to chamfer along the plate thickness direction.

 


                                       

 

 

IX. Application Expansion of Sheet Metal Bending Components

Sheet metal bending plays a pivotal role in manufacturing, particularly in the construction of brackets and gearbox housings. As a key element in various devices and products, sheet metal components serve as connectors and supports, ensuring structural integrity and functionality. Their precision, strength, and durability make them ideal for large-scale production in sectors such as automotive, electronics, and construction. Additionally, sheet metal bending enables the creation of high-precision connection pieces and protective covers, further broadening its application scope.